| 2008 | G.H. Lindup | Adapting the structural design actions standard for the seismic design of new industrial plant published in NZSEE Bulletin 40(3):81, Sep 2007 ( Citation) |
| 2007 | R. Dhakal, J. Mander and N. Mashiko | Identification of critical ground motions for seismic performance of structures published in Earthquake Engineering and Structural Dynamics, Vol. 35, February 2006, pp 989-1008. ( Citation) |
| 2006 | (Citation) | |
| 2005 | (Citation) | |
| 2004 | J. Matthews, D. Bull and J. Mander | Hollowcore Floor slab performance following a severe earthquake ( Citation) |
| 2003 | K. Berrymann, G. Downes, P. Kingsbury, J. Pettinga, M. Stirling, R. Van Dissen, M. Yetton | The tri-set of papers on the Earthquake Hazard and Risk Assessment of the Canterbury region all in NZSEE Bulletin, Vol. 34, No 4, Dec 2001 ( Citation) |
| 2002 | G. Hancox, N. Perrin and G. Dellow | /Recent Studies of Historical Earthquake-Induced Landsliding Ground Damage and MM Intensity in NZ/ ( Citation) |
| 2002 | G. Downes, D. Dowrick, R. Van Dissen, J. Taber, G. Hancox, E. Smith | /The 1942 Wairarapa, New Zealand, Earthquakes: Analysis of Observational and Instrumental Data/ ( Citation) |
| 2001 | M. J. N. Priestley | Performance based seismic design ( Citation) |
| 2000 | M. Stirling, S. Wesnousky and K. Berryman | Probabilistic Seismic Hazard Analysis of New Zealand ( Citation) |
| 1999 | R. Grapes and G. Downes | /The 1855 Wairarapa, New Zealand, earthquake - analysis of historical data/ ( Citation) |
| 1998 | J X Zhao, D J Dowrick and G H McVerry | Attenuation of Peak Ground Acceleration in New Zealand Earthquakes ( Citation) |
| 1997 | J H Wood and G R Martin | Evaluation of Seismic Design Parameters for the Museum of New Zealand Site |
| 1996 | ||
| 1995 | T J Larkin and S Marks | The Seismic Analysis of Sandy Sites |
| 1994 | J B Berrill, R O Davis and I F McCahon | Christchurch seismic hazard pilot study |
| 1993 | R Van Dissen, K R Berryman, J R Pettinga and N L Hill | /Paleoseismicity of the Wellington-Hutt Valley segment of the Wellington fault/ |
| 1992 | M Nishiyama | Seismic design of prestressed concrete buildings |
| 1991 | L T Pham | /A base-isolation design using spherically-ended rollers and telescopic shock absorbers/ |
| 1990 | R C Fenwick and L M Megget | Seismic behaviour of a reinforced concrete portal frame sustaining gravity loads |
| 1989 | T Paulay and W J Goodsir | The ductility of structural walls |
| 1988 | T Andriono and R Park | Seismic design considerations of the properties of NZ manufactured steel reinforcing bars |
| 1987 | D D Spurr | An economic solution for stabilising a slender arch roof |
| 1986 | M J N Priestley and D R Brunsdon | Assessment of seismic performance characteristics of reinforced concrete buildings constructed between 1936 and 1975 |
| 1985 | P R Boardman, B J Wood and A J Carr | /Union House: a cross-braced structure with energy dissipators/ |
| 1984 | All 19 members of the Bridge Study Group: Printed in Bulletin, Vol. 13, No. 3 | |
| 1983 | M J N Priestley | /Seismic design of masonry buildings - background to the draft masonry design code DZ 4210/ |
| 1982 | L M Megget | /Analysis and design of a base-isolated reinforced concrete frame building/ |
| 1981 | A Buchanan | Diagonal beam reinforcing for ductile frames |
| 1980 | W Smith | Statistical estimates of the likelihood of earthquake shaking throughout New Zealand |
| 1979 | R W G Blakeley, R Cooney and L M Megget | Seismic shear loading at flexural capacity in cantilever wall structures |
| 1978 | R Park and T Paulay | /Ductile reinforced concrete frames - some comments on the special provisions for seismic design of ACI 31871 and on capacity design |